The Tumbl Trak power spring is one of the best on the market today and resilient enough for gymnasts, cheerleaders and athletes of all sizes and abilities. They feature a durable, hard drawn high carbon steel (non-painted), 5cm x 10cm coil with expertly-designed plastic retainer caps. The caps have an additional set of grooves that keep the spring from falling out while in use, preventing dead spots in your floor. The advantages of the Tumbl Trak Spring Floor Kits are that the top and bottom caps are interchangeable (and more robust), plus the required hardware is included plus the hook and loop Velcro to help connect the layers of wood panels.
Thinking of building your own floor? Your biggest challenge will be to find the correct plywood appropriate for spring floors. The type most all commercial manufacturers use is Baltic Birch. We would recommend the BB/BB grade. This type of wood is strong, resilient, and resistant to warping or cracking. The ideal thickness is 9mm (3/8in). You will need two layers: One layer has the springs attached to it; the other is the offset layer which ties the floor together as one unit, providing uniformity of rebound. These layers can be connected by Velcro which is usually better as it is far easier to remove, repair or relocate.
1932pc Kit (for 12.8m x 12.8m / 42ft x 42ft) Includes
- 1932 Tumbl Trak Power Springs
- 1950 Nuts
- 1950 Screws
- 3864 Tumbl Trak Retainer Caps
- 2 Rolls of Hook Velcro (25m rolls)
- 4 Rolls of Loop Velcro (25m rolls)
- Plywood is NOT included
Download the Spring Floor Assembly Instructions here.
Download the Suggested Velcro Placement for 1932pc Kit here.
Download the 5'x5' Board Layout instructions for 42'x42' here.
2460pc Kit (for 12.8m x 16.4m / 42ft x 54ft) Includes
- 2460 Tumbl Trak Power Springs
- 2500 Nuts
- 2500 Screws
- 4920 Tumbl Trak Retainer Caps
- 2 Rolls of Hook Velcro (25m rolls)
- 5 Rolls of Loop Velcro (25m rolls)
- Plywood is NOT included
Download the Spring Floor Assembly Instructions here.
Download the Suggested Velcro Placement for 2460pc Kit here.
Download the 5'x5' Board Layout instructions for 42'x54' here.
No you would need to purchase your wood separately. The type most all commercial manufacturers use is Baltic Birch. We would recommend the BB/BB grade. This type of wood is strong, resilient, and resistant to warping or cracking. The ideal thickness is 9mm (3/8in). You will need two layers: One layer has the springs attached to it; the other is the offset layer which ties the floor together as one unit, providing uniformity of rebound.
Are the Springs Coated?
The Springs are made of raw steel and are not coated or painted. This sometimes means that surface blemishes and rust may form but does not affect the performance of the spring.
